Weight | 0.5 kg |
---|---|
Dimensions | 32 × 32 × 5 cm |
Size |
|
Wire diameter, mm | 200 – 220 , Ø 100 mm – 110 mm , Ø 50 mm – 70 mm , Ø 75 mm – 90 mm |
Duration of service |
|
Working temperature |
|
Temperature stability |
|
Produkta grupa |
|
Ražotājs |
|
Secure payment with:
€25.17 – €35.47 (iesk. PVN 21%)
Secure payment with:
Delivery options:
Delivery with manipulator
More information about delivery can be found here: Payment and delivery
Weight | 0.5 kg |
---|---|
Dimensions | 32 × 32 × 5 cm |
Size |
|
Wire diameter, mm | 200 – 220 , Ø 100 mm – 110 mm , Ø 50 mm – 70 mm , Ø 75 mm – 90 mm |
Duration of service |
|
Working temperature |
|
Temperature stability |
|
Produkta grupa |
|
Ražotājs |
|
AIRSTOP RGD CABLE SLEEVE
For the permanent airtight sealing of cable penetrations. This product is extremely flexible and resistant to ageing. Working temperature: from -5 °C.
PRODUCT DATA
To enable vapour retarders and other materials to fulfil their purpose as airtight layer in a construction these must also have air-tight joins at cable entry points. Warm air finds its way inside a building component through even the smallest of holes in the vapour retarder, where it then condenses. AIRSTOP Cable Sleeves, sealed airtight with age-resistant sealing plasters, guarantee that the construction is wind-tight and air-tight.
FIELD OF APPLICATION
cable entry points
ADVANTAGES
extremely flexible
resistant to ageing
integrated sealing plaster for air-tight adhesion
rubber heat-resistant up to 160°C (short-term)
PROCESSING GUIDELINE
Pull the rubber sleeve over the conduit and attach to the air-tight layer (vapour barrier, OSB,…) by the integrated sealing plaster. The diameter of the sleeve selected must have the appropriate dimension for the conduit entry point!
null
The materials used must be free from dust and grease and substrates must be dry and supporting.
The greater the pressure applied, the better the performance of the adhesive tape.
On highly porous and very absorbent substrates such as concrete, plaster, untreated steel or raw wood, we recommend pre-treatment of the substrate with our ISOCELL Primers.