AIRSTOP FROZEN Adhesive Paste, 310 ml

AIRSTOP FROZEN ADHESIVE PASTE
AIRSTOP FROZEN Adhesive Paste is used to join seams of EPDM, AIRSTOP vapour retarders, OMEGA Roof Underlay and Facade Lining and ISOWINDOW Window Tapes. It bonds with most substrates customary in construction, such as wood, metal, stone, concrete, brick, plaster and bituminous surfaces. The adhesive is permanently elastic, watertight and meets the requirements for air and wind tightness of a building envelope according to current standards such as DIN 4108-7. Working temperature: from – 10 °C
permanently elastic adhesive joint
waterproof
resistant to freezing

PRODUCT DATA
AIRSTOP FROZEN Adhesive Paste is used to join seams of EPDM, AIRSTOP vapour retarders, OMEGA Roof Underlay and Facade Lining and ISOWINDOW Window Tapes. It bonds with most substrates customary in construction, such as wood, metal, stone, concrete, brick, plaster and bituminous surfaces. The adhesive is permanently elastic, watertight and meets the requirements for air and wind tightness of a building envelope according to current standards such as DIN 4108-7.

ADVANTAGES
very good adhesion to a number of substrates
usable even at low temperatures
resistant to freezing
permanently elastic adhesive joint
waterproof
temperature-resistant from -40 °C to +80 °C

PROCESSING GUIDELINE
INFO
AIRSTOP FROZEN Adhesive Paste is applied using a manual injector to one side of the surface, which must be free from dust, grease, oil and loose parts. Soiled surfaces can be cleaned with spirit. Damp or wet surfaces must be dried before adhesion. We recommend an adhesion test before application.
AIRSTOPFROZEN Adhesive Paste has the function of a seal, not of a permanent join. Vapour barriers and other membranes must always be secured using tacks, battens etc. (mechanically).
AIRSTOP FROZEN Adhesive Paste is not UV-resistant and must be protected from direct sunlight.

Attention: avoid contact with PS-foams such as EPS, XPS, etc.