OMEGA Aluminium-Butyl FRGD Conduit Sleeve, Ø 100-165 mm

OMEGA ALUMINIUM-BUTYL FRGD CONDUIT SLEEVE
For the permanent airtight sealing of penetrations around pipes. For use on softfibreboard, concrete, roof underlay etc., indoors and outdoors. If necessary, use a primer! Working temperature: from + 5 °C.

PRODUCT DATA
A fast and permanent sealant for penetrations in bitumen vapour retarders, roofing membrane, soft fibreboard, OSB, under-roof sheathing, concrete floors etc. The high-stretch EPDM sleeve has a butyl adhesive collar, provides extremely strong adhesion and is tearresistant. At the same time it gives the required strain relief. The alu coating makes the sleeve waterrepellent and UV-resistant.

FIELD OF APPLICATION
openings for conduits

ADVANTAGES
extremely flexible, for roofs with greater slope
resistant to UV
rubber heat-resistant up to 160 °C (short-term)
integrated butyl- sealing plaster for air- and windproof bonding

PROCESSING GUIDELINE

Pull the rubber sleeve over the pipe and stick to the substrate with the integrated sealing plaster. The diameter of the selected pipe sleeve must have the appropriate dimension for the pipe feed-through!
The materials used must be free from dust and grease and substrates must be dry and supporting.
The greater the pressure applied, the better the performance of the adhesive tape.
On highly porous and very absorbent substrates such as concrete, plaster, untreated steel or raw wood, we recommend pre-treatment of the substrate with our ISOCELL Primers.