Steel chimney bench bracket for trapezoidal

The bracket of the chimney sweep bench is used to fix the chimney sweeps on roofs covered with trapezoidal sheets.
The steel chimney bench bracket for trapezoidal sheets has been designed for the aesthetic appearance of the roof and the ease of installation of chimney benches.
Chimney sweep benches are used for safe movement on chimney sweep roofs and provide access to roof elements (e.g. a fireplace).

Material:

3 mm galvanized steel, hot-dip galvanized steel mounting bolts

3 mm galvanized steel DX51 Z275 is used for the production of the chimney sweep bracket for the seam sheet.
The steel is covered with a zinc layer to protect it against mechanical damage and corrosion.
The greatest advantage of zinc coatings is the protection of steel for many years, and at the same time it does not require maintenance.
The bracket of the chimney sweep is screwed together with hot-dip galvanized steel screws.

Powder Coating:

Powder coating is dry painting, which involves applying powdered paint to the elements using high pressure.
The advantages of this method over other methods of painting metal elements are:
– temperature resistance up to 100 degrees Celsius
– protection against moisture
– protection against UV radiation
– anti-corrosion properties
– the possibility of using a wide range of colors for painting

Finish:

Powder coated galvanized steel
hot-dip galvanized steel mounting bolts